Table of Contents
Advertisement
Universal Knob
Move the cursor position by turning the universal knob on the front panel. Press
the knob to select different cursor lines. For example, if the current cursor is X1,
press to select X2, and press again to select X1-X2.
Gestures move the cursor quickly but not precisely, while the knob moves the
cursor precisely but not as quickly. You can use both in combination to suit your
needs: First, a rough adjustment is achieved by using gestures and then a fine
adjustment is achieved by using the universal knob.
Dialog Box
Touch the cursor name area of the dialog box, select the
cursor(s) in the pop-up list, and then rotate the universal
knob to adjust the position.
18 Measurement
18.1 Overview
The T3DSO2000A features a strong automatic measurement list. These parameters
can be automatically measured without cursors and include common measurements
such as rise time, fall time, peak-peak, and period. The T3DSO2000A can also
measure multiple channels at the same time, showing up to 5 parameter
measurements with statistics while in the M1 display mode and up to 12 parameters in
the M2 mode. If you wish to view more parameters on a specified channel, then the
"Simple" mode can be employed. For measuring waveform of interest in a time gate,
the "Gate" function is suggested.
Some parameter measurements (such as the mean) may be a value generated by all
the data in a frame. Some parameter measurements (such as period) accumulate all
measurements in a frame, but the displayed value is always the first value. If you want
to know the distribution of multiple parameters in one frame, you should use the
statistics function.
1.800.561.8187
information@itm.com
www.
.com
T3DSO2000A Manual. Page 106
Advertisement
Table of Contents
