Acquisition Setup; Overview - Teledyne LeCroy T3DSO2000A Series User Manual

A. Set the horizontal scale (timebase) by the virtual keypad
B. ▲ to increase and ▼ to decrease the horizontal scale
C. Set the trigger delay by the virtual keypad
D. ▲ to increase and ▼ to decrease the trigger delay
E. Set the trigger delay to zero
F. Set the trigger delay to the left part of the screen
G. Set the trigger delay to the right part of the screen
H. Open the Acquire dialog box

14.2 Acquisition Setup

14.2.1 Overview

Touch Acquire Menu on the quick menu of the timebase settings, or press the Acquire
button on the front panel, or touch the menu bar Acquire>Menu to recall the Acquire
dialog box on the right side.
A. Select the interpolation mode
B. Select the Acq mode
C. Select the acquisition mode (Normal/Peak)
D. Select the maximum memory depth
E. Recall the sequence dialog box
F. Select the vertical resolution. In 10 bits mode, the
bandwidth is limited to around 100 MHz
Acquisition: See the section " Acquisition" for details.
1.800.561.8187 information@itm.com
www. .com
T3DSO2000A Manual. Page 41