Zone Trigger - Teledyne LeCroy T3DSO2000A Series User Manual

15.10 Zone Trigger

The T3DSO2000A includes a zone trigger to help isolate elusive glitches. There are two
user-defined areas: Zone1 and Zone2. Users can set the property of each zone as
"intersect" or "not intersect" as an additional condition to further isolate the interesting
event quickly. "Intersect" only includes events that occur within the zone. "Not-intersect"
events include all events that occur outside of the zone.
Touch Trigger>Zone to recall zone dialog box:
A. Turn on or off zone trigger
B. Select the source: C1~C4
C. Turn on or off zone1
D. Set the property of zone1: Intersect or Not intersect
E. Set the coordinate of zone1. The range is within the waveform
area
F. Turn on or off zone2
G. Set the property of zone2: Intersect or Not intersect
H. Set the coordinate of zone2. The range is within the waveform
area
The zones can be created and moved by gestures or by setting
Zone>Zone Setting in the dialog box. The color of the zone's outline
is consistent with the color of the specified source (Channel 1 =
Yellow, etc...).
1.800.561.8187
Noise Reject On
www. .com
information@itm.com
T3DSO2000A Manual. Page 70