Display - Teledyne LeCroy T3DSO2000A Series User Manual

Touch Nodes to set the signal node number through the universal knob, or touch ▲ to
increase the nodes and ▼ to decrease.
Touch the cell in the table area to set the frequency and amplitude of the corresponding
node. Touch to activate the cell, adjust the value through the universal knob, or touch
the cell again to call up the virtual keypad.

26.3 Display

Bode plot display settings include amplitude, phase, cursors and trace visibility.
Amplitude
Set the amplitude coordinate axis of the bode plot. Touch Display>Amplitude to recall
the amplitude setting dialog box:
1.800.561.8187 information@itm.com
www. .com
T3DSO2000A Manual. Page 165