Main Menu - Lonworks - Group - Danfoss VLT HVAC Series Programming Manual

VLT ® HVAC Drive Programming Guide

3.12 Main Menu - LonWorks - Group 11

3.12.1 LonWorks, 11-**
Parameter group for all LonWorks specific parameters.
Parameters related to LonWorks ID.
11-00 Neuron ID
Range:
0 N/A* [0 - 0 N/A]
11-10 Drive Profile
Option:
[0] * VSD profile
[1] Pump controller
11-15 LON Warning Word
Range:
0 N/A* [0 - 65535 N/A]
Bit Status
0 Internal fault
1 Internal fault
2 Internal fault
3 Internal fault
4 Internal fault
5 Invalid type change for nvoAnIn1
6 Invalid type change for nvoAnIn2
7 Invalid type change for nvo109AnIn1
8 Invalid type change for nvo109AnIn2
9 Invalid type change for nvo109AnIn3
10 Initialization error
11 Internal communication error
12 Software revision mismatch
13 Bus not active
14 Option not present
15 LON input (nvi/nci) exceeds limits
11-17 XIF Revision
Range:
0 N/A* [0 - 0 N/A]
11-18 LonWorks Revision
Range:
0 N/A* [0 - 0 N/A]
Function:
View the Neuron chip's unique Neuron ID number.
Function:
This parameter allows selecting between LONMARK Functional Profiles.
The Danfoss Profile and the Node Object are common for all profiles.
Function:
This parameter contains the LON specific warnings.
Function:
This parameter contains the version of the external interface file on the Neuron C chip on the LON
option.
Function:
This parameter contains the software version of the application program on the Neuron C chip on
the LON option.
MG.11.C6.22 - VLT ® is a registered Danfoss trademark
3 Parameter Description
3
3-117