Main Menu - Lonworks - Group - Danfoss VLT Series Programming Manual

Parameter Description

3.12 Main Menu - LonWorks - Group 11

Parameter group for all LonWorks specific parameters.
Parameters related to LonWorks ID.
11-00 Neuron ID
3 3
Range:
0 [0 - 0 ] View the Neuron chip's unique Neuron ID number.
*
11-10 Drive Profile
Option:
[0] VSD profile
*
[1] Pump controller
11-15 LON Warning Word
Range:
0 [0 - 65535 ] This parameter contains the LON specific
*
Bit Status
0 Internal fault
1 Internal fault
2 Internal fault
3 Internal fault
4 Internal fault
5 Reserved
6 Reserved
7 Reserved
8 Reserved
9 Changeable types
10 Initialization error
11 Internal communication error
12 Software revision mismatch
13 Bus not active
14 Option not present
15 LON input (nvi/nci) exceeds limits
11-17 XIF Revision
Range:
0 [0 - 0 ] This parameter contains the version of the external
*
11-18 LonWorks Revision
Range:
0 [0 - 0 ] This parameter contains the software version of the
*
96
Function:
Function:
This parameter allows selecting between
LONMARK Functional Profiles.
The Danfoss Profile and the Node Object
are common for all profiles.
Function:
warnings.
Function:
interface file on the Neuron C chip on the LON
option.
Function:
application program on the Neuron C chip on the
LON option.
MG.11.CC.02 - VLT
®
VLT HVAC Drive Programming Guide
11-21 Store Data Values
Option:
[0] Off
*
[2] Store all
setups
®
is a registered Danfoss trademark
Function:
This parameter is used to activate storing of
data in non-volatile memory.
Store function is inactive.
Stores all parameter values in the E
The value returns to Off when all parameter
values have been stored.
2 PROM.