Dr 5 - Assignment Led1, Led 2; Dr 6 Output Values For The Remote Display; Dr 6 - Value 1, Value 2 For Display; Table 5-3 Allocation Of Dr 6 - Siemens Siwarex U Device Manual

0
1
2
3
5.4.4 DR 5 – assignment LED1, LED 2
A meaning can be assigned to both status LEDs on the front side of the SIWAREX
modules ST1 and ST2. The following meanings are possible:
Code
100
101
102
103
200
201
202
203
100

5.5 DR 6 Output values for the remote display.

In DR6, values currently to be output are specified for the remote display.
Check all parameters and modify as necessary.
o
Send DR 6 to the scale
o
Name
Value 1 for display
Value 2 for display
Table 5-3 Allocation of DR 6
5.5.1 DR 6 – value 1, value 2 for display
An optional value can be displayed on up to two connected external Siebert
displays. The first display must be set to Address 1 and the second to Address 2.
After the transfer of DR 6 to SIWAREX U, the corresponding value is output on the
remote display.
SIWAREX U
no display
4-digit display Siebert display
5-digit display Siebert display
6-digit display Siebert display
Status information
Channel error
Limit value 1
Limit value 2
Scale adjusted
Channel error
Limit value 1
Limit value 2
Scale adjusted
Channel error
Model Length Default
INT 2 0
INT 2 0
4
4BWEIGHING FUNCTIONS
Channel no.
Channel 1
Channel 1
Channel 1
Channel 1
Channel 2
Channel 2
Channel 2
Channel 2
Channel 1
Range of values/Meaning
Value to be displayed on the Siebert remote display, set to
Address 1.
Value to be displayed on the Siebert remote display, set to
Address 2.
5-35