Practical Example For User Adaptation List Display - Siemens SINUMERIK 840C Installation Instructions Manual

09.95
List contents:
Text lists
Examples:
List contents:
Semantic lists
Examples:
List contents: Info lists
Example:
5.10.2
Problem

Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SINUMERIK 840C (IA)
More user manuals on
The texts for all data are stored in the text lists.
2040
2080
5600.0
5600.2
The data type (L = long, C = 8 bits, S = short, etc.) and the display format, any
special treatment and input limits are stored in the semantics lists.
Data Type
160 L
164 L
168 L
208 L
The information under "Treatment" is interpreted as follows:
05 bzw. 07
"0.0625 5.2 2"
Explanations for all the data that appear in the information display (key ¼) can
be stored in the information lists.
2040

Practical example for user adaptation list display

"PLC machine data 2007 is supplied with the text "Number of assigned maga-
zine" and with input limits 0 to 4
The user wishes to change this text to the following:
"Number of assigned tool turret"
and the input limits to 1 to 99.
ManualsBase.com
5.10.2 Practical example for user adaptation list display
"Exact stop limit coarse"
"Exact stop limit fine"
"No measuring circuit monitoring"
"Rounding to whole/half degrees"
Treatment
05
00
"0.0625 5.2 2"
72
00 1:1 - representation
special treatment or.
-representation
Unit no.
(the units are in text list tea1unit.106)
5 places, of which 2 are behind the decimal point
Factor for display
"This data is not active until Power On".
5 Machine Data Dialog (MDD – as from SW 3)
Input limits
! (write-protected)
[
2.32]
[ 1.99999999]
5–53