Replacing Light Engine Exhaust Fan (#11) - Christie Crimson Series Service Manual

a) Remove the eight screws securing the fan grill bracket.
b) Remove the affected fan from the rubber boot and replace.
Make note of the harness routing.
9. To re-install, follow these steps in reverse order.
Make sure to align the arrow on the fan with the arrow on the rubber boot.

Replacing light engine exhaust fan (#11)

The light engine exhaust fan draws hot air out of the light engine.
1. Remove the electronics-side cover (on page 43).
2. Remove the card cage (on page 66).
3. Disconnect the fan 11 inline harness.
4. Loosen four captive screws to remove the bracket.
5. Remove the four screws securing the fan to the light engine and remove it.
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
50