Installation Cautions; Installing The Power Supply Unit (Sold Separately) - Panasonic VL-VM701 Installation And Operating Instructions Manual

4. Installation

4.1 Installation cautions

Refer to the information found in 2 Important Information
(page 7) before installing the product.
CAUTION
R Always connect power cables to the appropriate
connection terminals. Incorrectly connecting the
power cables may damage the power supply unit.
R To prevent the power cables from disconnecting and
to prevent electric shock, secure the power cables
using the included cable binders and attach the cable
covers.
R If the wiring passes outdoors, use a conduit and a
surge protector.
R If the wiring passes underground, use a conduit, and
do not make any connections underground.
R Install the product securely adhering to the
instructions in this document to prevent it from falling
off the wall. Avoid installing onto low-strength walls,
such as gypsum board, ALC (autoclaved lightweight
concrete), concrete block, or veneer (less than
18 mm thick) walls.
20
4.2 Installing the power supply
unit (sold separately)
Required items
– Power supply unit (VL-PS240 or VL-PS2410; sold
separately)
– Cable binders (included with power supply unit)
– Screws (included with power supply unit)
– Wires for AC and DC connection (user supplied)
See "4.6.2 Wire type and maximum wire length
(Page 39)".
Installation location
R The device must be installed inside an electrical
panel or cabinet.
R A readily accessible disconnect device shall be
incorporated external to the equipment.
The external disconnect device must be certified, and
have a creepage and clearance distance of 3 mm or
more.
Installation methods
The following 2 methods can be used for installing the
power supply unit.
– mounting on a DIN rail (user supplied)
– attaching directly to a wall