Calling An Extension (Optional Function) - Panasonic VG-M186D Operation Manual

Color monitor indoor master for digital pair wiring system
Table of Contents

Advertisement

Calling an Extension
Receiving a Call from an Extension
Displayed when volume is adjusted.
Incoming Call Display
2
Responding from the Handset
Pick up the handset.
The Talk Display will appear
and you can then talk to the
calling party.
Displayed when volume is adjusted.
Talk Display
4
Replace the handset when
you are finished.
The display will disappear and
the call will be ended.
Notes and notices on hands-free talking
14
(Optional Function)
1
If there is a call from an Extension,
you will hear the call sound and the
Incoming Call Display will appear.
The chime can also be heard from Expansion Speakers.
Touch the
High
or
Low
Button to adjust the ringer volume.
The Incoming Call Display will be displayed
until the handset is replaced.
Responding Hands Free
Press the Hands-free Button.
You will hear a "Pi" sound, the Talk
ハンズフリー
Display will appear, and you can
HANDS FREE
then talk to the calling party.
3
Talk.
Using the Handset
About 3 minutes after you pick up the handset,
the display and call will be automatically cut off.
You will hear a "Tsu-tsu" sound from the
handset 10 seconds before the call is cut off.
Hands Free
About 1 minute after you press the Hands-free
Button, the display and call will be
automatically cut off.
Touch the
or
Button to adjust the
High
Low
receiver volume.
(The volume cannot be adjusted for hands-free
calling.)
Press the Hands-free Button
when you are finished.
ハンズフリー
HANDS FREE
You will hear a "Pi" sound, and the
display will disappear and the call
will end.
Refer to page 11
Pi
Call Menu Display
Displayed when volume is adjusted.
Talk Display
Pi
Calling an Extension
Calling an Extension
1
Pick up the handset and make sure
that a call is not already connected.
The Call Menu Display will appear.
Notice
If a call is in progress, you will hear
the conversation from the handset.
2
Touch the Extension Button on the
Call Menu Display.
The Call Display will appear and you will hear a
low call sound from the handset.
VG-R397N
When the other party picks up the handset, the Talk
非常押ボタン
強く
押す
Display will appear and you can talk to the other party.
Puu
共同玄関
電 気 錠
* The Extension Button will be displayed only if an
室 内 呼
管理人呼
Extension is included in the system.
Extension
3
Talk.
Touch the
or
Button to adjust the
High
Low
receiver volume.
About 3 minutes after you pick up the handset, the
display and call will be automatically cut off.
You will hear a "Tsu-tsu" sound from the handset 10
seconds before the call is cut off.
4
Replace the handset when you are finished.
The display will disappear and the call will be ended.
■Receiving a Call from a Door Intercom (with an
Alarm Display and Remote Test Terminal) or
Color Camera Foyer Unit
...You will hear a chime (pin-pon) from the handset and
the Indoor Master.
...The source of the call will flash in the middle of the display.
...If the telephone handset on the Indoor Master or
Extension is replaced and then the responding party
picks up the handset again, you can talk to the Door
Intercom (with an alarm display and remote test
terminal) or Color Camera Foyer Unit.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vg-m187d

Table of Contents