Cleaning; Open Source Software Notice - Panasonic VL-MN1000 Installation And Operating Instructions Manual

11.2 Cleaning

Wipe the product with a soft, dry cloth.
For excessive dirt, wipe the product with a moist cloth.
Important:
R Do not use any cleaning products that contain
alcohol, polish powder, powder soap, benzine,
thinner, wax, petroleum, or boiling water. Also do
not spray the product with insecticide, glass
cleaner, or hair spray. This may cause a change
in colour or quality of the product.
When cleaning the display
Use a soft, dry cloth to clean the display, making sure not
to scratch its surface.
Note:
R Before cleaning the display, we recommend you use
the "Cleaning" setting (8.1 Changing the room
monitor's settings (Page 23)) to disable the display
temporarily.

11.3 Open source software notice

Parts of this product use open source software supplied
based on the relevant conditions of the Free Software
Foundation's GPL and/or LGPL and other conditions.
Please read all licence information and copyright notices
related to the open source software used by this product.
This information is available at the following web page:
http://panasonic.net/pcc/support/intercom/vn1900
At least three (3) years from delivery of this product,
Panasonic Corporation will give to any third party who
contacts us at the contact information provided below,
for a charge of no more than the cost of physically
distributing source code, a complete machine-readable
copy of the corresponding source code and the copyright
notices covered under the GPL and the LGPL. Please
note that software licensed under the GPL and the LGPL
is not under warranty.
http://panasonic.net/pcc/support/intercom/vn1900
11. Other information
29