Table of Contents
Advertisement
Kollmorgen
3.142
IDN278 Maximum Traverse
Data Length: 4 bytes
Data Type:
Minimum:
Maximum:
Default:
3.143
IDN288 IDN List of Data Programmable in CP2
A list of all IDNs that may be written by the master in CP2. The IDNs are listed in the
order in which the master should write them to avoid data dependency problems. Data
dependency problems may arise, for example, when the range of one IDN depends upon
an IDN that has not yet been written.
Data Length:
Data Type:
Minimum:
Maximum:
Default:
3.144
IDN289 IDN List of Data Programmable in CP3
A list of all IDNs that may be written by the master in CP3. The IDNs are listed in the
order in which the master should write them to avoid data dependency problems. Data
dependency problems may arise, for example, when the range of one IDN depends upon
an IDN that has not yet been written.
Data Length:
Data Type:
Minimum:
Maximum:
Default:
3.145
IDN290 Device Type
Neccessary information for some master controls.
Data Length: 2 bytes
Data Type:
Minimum:
Maximum:
Default:
®
sercos
for S300/S700
04/2016
Unsigned decimal
0 or Module value, if active Run-Up Check:
31
2
- 1
0
2 byte elements, variable
length array
IDN
2 byte elements, variable
length array
IDN
Unsigned decimal
0
0
0
Non-Volatile:
Yes
Write Access:
CP2, CP3, CP4
Cyclic Transfer:
ASCII Param.:
SWE2
Non-Volatile:
Fix
Write Access:
Read-only
Run-Up Check:
Cyclic Transfer:
ASCII Param.:
Non-Volatile:
Fix
Write Access:
Read-only
Run-Up Check:
Cyclic Transfer:
ASCII Param.:
Non-Volatile:
Fix
Write Access:
read-only
Run-Up Check:
Cyclic Transfer:
ASCII Param.:
®
sercos
IDN Set
73
Advertisement
Table of Contents
Troubleshooting
