Renaming A Receiver Or Transmitter - Extron electronics XMP 240 C AT User Manual

box. The new name is written to the Dante interface of the XMP 240 C AT. Repeat as
necessary for all devices.
NOTE: The device name assigned in Dante Controller only applies to the Dante
interface and does not affect the device name recognized in DSP Configurator.
Figure 125.

Renaming a Receiver or Transmitter

In addition to renaming devices, individual receiver and transmitter channels can be
renamed in Dante Controller. To better organize the various receivers and transmitters,
it is recommended each receiver and each transmitter be named using a description of
the device they belong to, the location of the device, or the purpose of the receiver or
transmitter.
To view the receiver or transmitter channels in Dante Controller, click the
receiver or transmitter device name to expand it. The
device is expanded (see figure 126,
Figure 126.
TIP: To simplify setup and operation of large matrix systems, rename the receiver and
transmitter channels to better indicate the source at the transmitters or
receivers.
Rename Device Confirmation Dialog Box
).
1
Expanded Device View — Input and Output Names
+
sign next to the
+
sign becomes a sign when the
–
XMP 240 C AT • Dante Controller 93