Extron electronics XMP 240 C AT User Manual page 105

Command
Ethernet Data Port
Set current connected
port timeout
View current connected
port timeout
Set global IP port
timeout
View global IP port
timeout
KEY:
X6( = The number of seconds before timeout on IP connections:
(min = 1, max = 65000 & default = 30 = 300 seconds)
Serial Data Port
Configure parameters
View parameters
View mode
Configure flow control
View flow control
KEY:
X1& = General Information Query
X2% = Baud rate: 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600, 14400, 19200, 28800,
38400, 57600, 115200 (default = 9600)
X2^ = Parity
X2& = Data bits
X2* = Stop bits
X2( = Port type
X3) = Flow control
Data Pacing [specified in milliseconds between bytes]: 0000 – 1000 (default = 0 ms).
X3! =
For host ports, this value is ignored – always returns 0
ASCII command
(host to device)
E 0*X6(TC}
E 0TC}
E1*X6(TC}
E 1TC}
E 1*X2%, X2^, X2&, X2* CP} Cpn1• CcpX2%, X2^,
E 1CP}
E 1CY}
E 1*X3), X3!CF}
E 1CF}
Odd, Even, None, Mark, Space
Only use the first letter (default = N = None)
7, 8 (default = 8)
1, 2 (default = 1)
0 = RS-232, 1 = RS-422, 2 = RS-485 (default = 0 = RS-232)
Hardware, Software, None [only use the first letter]
(default = N = None)
Response
(device to host)
Pti0*X6(]
X6(]
Pti1*X6(]
X6(]
X2&,X2*]
X2%, X2^, X2&, X2*]
X2(]
Cpn1• CflX3), X3!]
X3), X3!]
XMP 240 C AT • Remote Control and Configuration
Additional description
110