Input Delay Block - Extron electronics XMP 240 C AT User Manual

Input Delay Block

Double-click the
processor into the block.
Figure 53.
Once a delay processor is inserted into the
dialog box.
Delay
Figure 54.
Delay Channel Name — This name changes to match the default or user defined input
1
name.
Units of Measurement — Radio buttons change the unit of measurement used by
2
the delay fader and text box.
units of measurement. Values are converted when the unit of measurement is changed.
Changing the unit of measurement does not alter the amount of delay applied to the
signal.
Delay Fader and Text Box — Adjusts the amount of delay applied to the signal. Click
3
and drag the fader up or down to increase or decrease the amount of delay. Click the
fader once and use the <
(or the 1 sample equivalent in milliseconds, feet, or meters). Use the text box below the
fader to input a delay value.
Temperature Panel — Becomes available when using delay in feet or meters.
4
Compensates delay for ambient temperature in the acoustic space. Temperature is not
available when using samples or milliseconds as the unit of measurement.
OK Button — Confirms changes made to the contained parameters and closes the
5
Delay
Set Defaults Button — Resets the delay to 4800 samples.
6
Cancel Button — Reverts any changes made to the contained parameters back to
7
their states when the current instance of the
the dialog box.
Bypass Button — Bypasses the delay. When the button is red, bypass is enabled.
8
Delay Help Button —Opens the
9
file for further assistance in understanding operating the delay processor.
block to open the delay drop-down. Click
Delay
Delay Block and Drop-Down Menu
Delay Dialog Box
Samples
Up Arrow
dialog box.
block, double-click the block to open the
Delay
Delay Channel Name
1
Units of Measurement
2
Delay Fader and Text Box
3
Temperature Panel
4
OK Button
5
Set Defaults Button
6
Cancel Button
7
Bypass Button
8
Delay Help Button
9
, , , and
Milliseconds Feet
> or < > to adjust delay in 1 sample steps
Down Arrow
dialog box was opened and closes
Delay
topic of the DSP Configurator Help
Delay Operation
XMP 240 C AT • DSP Configurator Software
to insert the delay
Delay
are available
Meters
35