Macros Drop-Down; Presets Drop-Down; Dsp Configurator Status Panel - Extron electronics XMP 240 C AT User Manual

Macros Drop-Down

The
Run Macro
mode. The drop-down list is unavailable in Emulate mode.
The
Run Macro
pushed to the device. The list of macros updates dynamically when a new macro is created.
Macros created in DSP Configurator that have not been pushed to the device appear in the
list with an asterisk to the right of the macro name. Only macros that have been pushed
to the device can be run from the
information on configuring macros).
Figure 14.

Presets Drop-Down

The
Presets
current configuration file or on a device connected in Live mode. Presets with an asterisk
next to them are on the XMP 240 C AT, but not in the current configuration file. Run a preset
to load it into the configuration file. Alternatively, perform a backup to run all presets and
load them into the current configuration file
Figure 15.
After selecting a preset from the list, choose one of the following actions from the
DSP Configurator status panel:
— Recalls the selected preset and applies settings to the main workspace.
Recall
— Cancels the preset recall and returns to the main workspace with the current
Cancel
emulation or state intact.
— Deletes the selected preset from the configuration.
Delete
Figure 16.

DSP Configurator Status Panel

This panel displays the current status of DSP Configurator and shows when data is being
pushed to or pulled from the device. When the software is ready to perform actions, the
panel reads
Figure 17.
drop-down menu is available when connected to the XMP 240 C AT in Live
drop-down list allows the user to view and run all macros that have been
Run Macro
Macros Drop-Down Menu
drop-down menu allows the user to view and apply presets saved in the
Presets Drop-Down Menu
Preset and Action Selection
.
Ready
DSP Configurator Status Panel
drop-down list (Macros
(File on page 12).
XMP 240 C AT • DSP Configurator Software
on page 72 for
16