Extron electronics XMP 240 C AT User Manual page 37

Figure 48. Changing Dynamics Processors
AGC (Automatic Gain Control)
Figure 49. AGC Dialog Box
Dynamics Channel Name — This name changes to match the default or user defined
1
input name.
AGC Graph — Graphically displays AGC parameter settings. Parameters can also be
2
adjusted using this graph. Click and drag the yellow lines to adjust the
Click and drag the bottom dot to adjust the
middle dot to adjust the
the parameter.
Target
AGC Parameters List and Control — Provides text boxes to adjust all AGC
3
parameters.
Attack Time
their respective parameters. Click a slider once and use the <
< > keys to adjust the respective parameter in 1 ms steps.
Right Arrow
Bypass Button — Bypasses the AGC processor. When the button is red, bypass is
4
enabled.
Set Defaults Button — Resets all AGC parameters to their default values. To view
5
individual parameter default values, see the DSP Configurator Help file by clicking the
button (
Dynamics Help
OK Button — Confirms changes made to the contained parameters and closes the
6
AGC dialog box.
Cancel Button — Reverts any changes made to the contained parameters back to
7
their states when the current instance of the
dialog box.
Dynamics Help Button — Opens the
8
DSP Configurator Help file for further assistance in operating dynamics processors.
Dynamics Channel Name
1
AGC Graph
2
AGC Parameters List and Control
3
Bypass Button
4
Set Defaults Button
5
OK Button
6
Cancel Button
7
Dynamics Help Button
8
Threshold
parameter. Click and drag the top dot to adjust
Maximum Gain
, , and
Hold Time Release Time
) and opening the About Dynamics
8
AGC dialog box was opened and closes the
Dynamics Operation
XMP 240 C AT • DSP Configurator Software
parameter.
Window
parameter. Click and drag the
also have sliders that adjust
> and
Left Arrow
topic.
topic of the
31