Table of Contents
Advertisement
Renaming a Receiver
The default names shown in the
interface of the connected device (see figure 127,
labelled
through
AT#1
AT#48
To rename a XMP 240 C AT receiver:
1.
From the
Device
menu on the
<
> on the keyboard. The
Ctrl+D
2.
From the
(Select a Dante Device..)
XMP 240 C AT (see figure 127,
3.
On the
screen, select the
Device View
4.
Click on the name of the receiver to be renamed. The name becomes a text box with a
cursor (
).
3
5.
Enter the new name (up to 31 characters) using any combination of letters, numbers,
and special characters except for
6.
Press
on the keyboard to confirm the name, or click another channel text box.
<Enter>
7.
Repeat steps 4 through 6 to rename additional receiver channels.
8.
When finished renaming receivers, close the
Figure 127.
Device View Screen — Renaming a Receiver
Renaming a Transmitter
The default names shown in the
interface of the connected device (see
transmitters are labelled Exp_Out-01 through Exp_Out-48. Follow the instructions on the
next page to rename a transmitter.
To rename a XMP 240 C AT transmitter:
1.
Select
from the
Device View
<
> on the keyboard. The
Ctrl+D
2.
From the
(Select a Dante Device...)
XMP 240 C AT (see
figure
3.
On the
screen, select the
Device View
4.
Click in the
Channel
Label
renamed. A text box and cursor appear (
5.
Enter a new name (up to 31 characters) using any combination of letters, numbers, and
special characters except for
6.
Press <
> on the keyboard to confirm the name, or click another label text box.
Enter
7.
Repeat steps 4 through 6 to rename additional transmitter channels.
8.
When finished renaming transmitters, close the
column are extracted from the Dante
Dante Receivers
). The XMP 240 C AT receivers are
1
. Follow the instructions on the next page to rename a receiver.
Network View
screen, select
dialog box opens.
Device View
drop-down menu, select the name of the desired
).
1
tab (
Receive
,
, and
(period).
@
=
.
Device View
column are extracted from the Dante
Dante Transmitters
figure
126,
on the previous page). The XMP 240
2
menu on the
Device
Network View
Device View
dialog box opens.
drop-down menu, select the name of the
128,
on the next page).
1
tab (
Transmit
column to the right of the name of the transmitter being
).
3
,
, and
(period).
@
=
.
Device View
XMP 240 C AT • Dante Controller
, or press
Device View
).
2
dialog box.
screen or press
).
2
dialog box.
94
Advertisement
Table of Contents
