Table of Contents
Advertisement
1.
Click the expansion or input name field.
Figure 26.
2.
Delete or highlight the text, and type the desired name.
Figure 27.
3.
Press the <
name. Press the <
Figure 28.
Inputs Overview
With the Extron Expansion Port (EXP), two EXP enabled devices can be connected for
bidirectional communication. When two units are connected, one unit must be set as the
Primary Unit and the other must be set as the Secondary Unit (see
page 88). This synchronizes the sampling clocks of the two units.
AT inputs allow a XMP 240 C AT model to receive signal from the audio network. Network
audio routing is done with Dante Controller (see
Figure 29.
Input Name Field
Input Name
> key or navigate away from the field to confirm and apply the new
Enter
> key to navigate to and highlight the next name field.
Down Arrow
Renamed Input
AT Inputs
Expansion Bus
Dante Controller
on page 89).
XMP 240 C AT • DSP Configurator Software
on
21
Advertisement
Table of Contents
