Extron electronics XMP 240 C AT User Manual page 24

Figure 20. Connect to device... TCP/IP, USB, and RS-232 Dialog Box
3.
When a connection with a device is established, the
box opens.
Figure 21. Synchronize with Device Dialog Box
a. Pull — Pulls the configuration file, presets, macros, and ACP configurations from
the device and displays it in the DSP Configurator main workspace.
b. Push — Pushes the configuration file, presets, macros, and ACP configurations
open in DSP Configurator to the connected XMP 240.
The check boxes indicate what will be pushed when OK is selected. Pushing a
selected item will overwrite that item on the device.
NOTE: If only pushing selected presets, the preset selection dialog box opens
after clicking
OK
device.
. This dialog allows you to select which preset to push to the
XMP 240 C AT • DSP Configurator Software
Synchronize with Device dialog
18