Dsp Sis Commands; Symbol Definitions; Special Characters - Extron electronics XMP 240 C AT User Manual

DSP SIS Commands

Many digital signal processor (DSP) functions such as gain, mute, and group masters can
be controlled using SIS commands. These commands follow the same general rules as
basic SIS commands but the variables can be more complex. Also, an understanding of the
audio signal flow is helpful for using audio DSP SIS commands. The following gain blocks
are addressable via SIS commands:
Mic/Line Input (gain and mute)
•
• Aux Input (gain, mute, and source)
Pre-mixer (gain and mute)
•
• Mix-points (gain and mute)

Symbol Definitions

] =
=
}
=
•
=
|
=
E
W =

Special Characters

The HTML language reserves certain characters for specific functions. The device will not
accept the following characters as a part of preset names, the device names, passwords, or
locally created file names.
The XMP 240 C AT rejects the following characters:
{space (OK for names)} + ~ , @ = ' { } [ ] < > ` " ; : \ ?
Carriage return/line feed
Carriage return (no line feed)
Space character
Pipe (can be used interchangeably with the
Escape key
Can be used interchangeably with the
XMP 240 C AT • Remote Control and Configuration
Virtual Return (gain and mute)
•
• Post-mixer (gain only)
Output (attenuation and mute)
•
}
character)
E
character
121