Table of Contents
Advertisement
Ducker
After inserting a ducker processor, double-click the
dialog box.
Ducker Configuration
Figure 58.
Ducker Configuration Dialog Box
Duck Source Configuration — The
1
when a ducker is inserted (default). In the
ducked. In the
by (dB)
channel selected in the
source, ducking occurs on the selected channels.
Duck Parameter Settings — Contains controls for setting
2
, and
Hold Time
Release
Ducking Operation
topic in the DSP Configurator Help fie.
Duck Priority Tree — Displays the ducking priority for all
3
Select another input to populate the
information for that channel. Channels with an adaptive gain processor are appended
with an
. Channels with adaptive gain processors cannot be selected from this
(AG)
dialog box.
Ducking Operation Help Button —Opens the
4
DSP Configurator Help file for further assistance in ducker configuration.
Duck
Duck Source Configuration
1
Duck Parameter Settings
2
Duck Priority Tree
3
Ducking Operation Help Button
4
Enable Source Mic/Line
column, check the inputs that will be
Duck
column, enter the amount of ducking that will occur on each
column. When the threshold is exceeded on the duck
Duck
. Click the
Ducking Operation Help
Ducker Configuration
Ducking Operation
XMP 240 C AT • DSP Configurator Software
icon to open the
checkbox is checked
,
Threshold
Attack Time
button (
) to open the
4
and
channels.
Input
Aux In
dialog with the ducker
topic of the
,
37
Advertisement
Table of Contents
