Dante Device - Extron electronics XMP 240 C AT User Manual

then clicking on the minutes and entering the number of minutes.
4. Set the time zone by using the
5.
Use the
(default).
NOTE: The information displayed in the
information to reflect the current time, click

Dante Device

This tab allows the XMP 240 C AT Dante settings to be configured within DSP configurator
without opening Dante Controller.
Figure 118.
ATTENTION:
•
It is essential that a Dante device be named immediately after it is connected to the
Dante network and before audio connections with other devices are established.
Existing connections are removed when a device is renamed.
• Il est essentiel d'identifier un appareil Dante immédiatement après sa connexion
au réseau Dante et avant tout établissement de connexion audio avec d'autres
appareils. Les connexions existantes sont supprimées dès qu'un appareil est
renommé.
Dante Device Name
A Dante device can be renamed to identify the device on the audio network.
To assign the Dante device name:
1. Select
2. Use the arrows to navigate to the
3. Click the
4. Enter a device name for the Dante interface.
5. Click
Apply
6. Click
Yes
Zone
radio buttons to enter the daylight saving region, or leave off
Daylight Savings
Dante Device Tab in Device Settings Dialog Box
.
Tools > Device Settings
text box.
Device name
. A confirmation dialog box opens.
, to confirm existing connections will be removed after the name is changed.
drop-down.
tab is static. In order to update the
Date/Time
.
Refresh
tab (see figure 118).
Dante Device
XMP 240 C AT • Configuration Tools 86