Extron electronics XMP 240 C AT User Manual page 44

Adaptive Gain
After inserting an adaptive gain processor, double-click the
dialog box.
Adaptive Gain
Figure 59. Adaptive Gain Dialog Box
Adaptive Gain Source Configuration — In the
1
that will have gain added by the adaptive gain processor. In the
enter the maximum amount of gain that will be applied to each channel selected in the
column. When a box is checked, gain is applied to that channel when
Add Gain To
signal exceeds the threshold on the adaptive gain trigger channel.
NOTE: For every 1 dB of signal beyond the level set in the
of gain will be added to the channels selected in the
occurs until the maximum gain set in the
Adaptive Gain Parameter Settings — Contains controls for
2
, and
Hold Time Release Time
Adaptive Gain Operation Help Button — Opens the
3
of the DSP Configurator Help file for further assistance in adaptive gain configuration.
AG
Adaptive Gain Source Configuration
1
Adaptive Gain Parameter Settings
2
Adaptive Gain Operation Help Button
3
Add Gain To
Max Gain (dB)
.
Adaptive Gain Operation
XMP 240 C AT • DSP Configurator Software
icon to open the
column, check the inputs
column,
Max Gain (dB)
field, 1 dB
Threshold
column. This
Add Gain To
field has been applied.
,
Threshold Attack Time
topic
,
38