Table of Contents
Advertisement
Noise Gate
Figure 52.
Noise Gate Dialog Box
Noise Gate Channel Name — This name changes to match the default or user
1
defined input name.
Noise Gate Graph — Graphically displays noise gate parameter settings. Parameters
2
can also be adjusted using this graph. Click and drag the upper dot to adjust
Click and drag the middle dot to adjust
view at default settings) to adjust
Noise Gate Parameter List and Control — Lists all configurable parameters
3
for the noise gate. Text fields are available to adjust
,
,
Ratio
Attack Time
Hold Time
adjust
,
Attack Time
Hold Time
<
> and <
Left Arrow
Right Arrow
steps.
Bypass Button — Bypasses the noise gate. When the button is red, bypass is
4
enabled.
Set Defaults Button — Resets all noise gate parameters to their default values. To
5
view individual parameter default settings, see the DSP Configurator Help file by clicking
the
button (
Dynamics Help
OK Button — Confirms changes made to the contained parameters and closes the
6
dialog box.
Noise Gate
Cancel Button — Reverts any changes made to the contained parameters back to
7
their states when the current instance of the
closes the dialog box.
Dynamics Help Button — Opens the
8
DSP Configurator Help file for further assistance in operating dynamics processors.
Noise Gate Channel Name
1
Noise Gate Graph
2
Noise Gate Parameter List and Control
3
Bypass Button
4
Set Defaults Button
5
OK Button
6
Cancel Button
7
Dynamics Help Button
8
. Click and drag the bottom dot (out of
Threshold
.
Max Attenuation
Threshold
, and
. Click and drag the sliders to
Release Time
, and
. Click a slider once and use the
Release Time
> keys to adjust the respective parameter in 1 ms
) and navigate to the
8
About Dynamics
Noise Gate
Dynamics Operation
XMP 240 C AT • DSP Configurator Software
.
Ratio
,
,
Max Attenuation
topic.
dialog box was opened and
topic of the
34
Advertisement
Table of Contents
