Groups - Extron electronics XMP 240 C AT User Manual

Groups

Groups allow master control of Gain, Mute, Bass, Treble, Loudness and Meter for groups of
channels. Groups are used in macros and other control configurations.
Click
1
2
3
4
Figure 95.
1
2
3
4
5
6
7
Tools > Configure Groups
Select Group
Select Control Type
Available Group Members
Change Name Button
Group Controls Dialog Box
Select Group — Provides a drop-down menu to select the number of the group to
be configured. If the group has been configured and named, the group name appears
next to the group number. If the group slot is empty, it reads
number. There are 64 group slots available.
Select Control Type — Group controls can manage
, or for the specified inputs, mix-points, or outputs. From the
Loudness Meter
panel, select the type of control from the
Control Type
lists.
Treble
and
NOTE: Bass Treble
on a channel and only allow channels with the filters to be placed in a group.
Available Group Members — This section populates according to the selected
control type and lists all inputs, mix-points, and outputs available to be added as group
members. Check the box next to a member to add it to the group. Group members
must be the same control type. The maximum number of group members for a single
group is 128.
NOTE: Loudness processors can be selected from input and output gain stages.
Change Name Button — Once a group has been created, select it from the
drop-down menu (
Group 1
group.
Apply Button — Click
Apply
dialog box opens allowing the group name and number to be edited.
Group Details
Click to apply group changes.
OK
Delete Current Group Button — Select a group from the
menu and click
Delete Current Group
Close Button — Click
Close
applied will be lost.
to open the
Configure Groups
Apply Button
5
Delete Current Group Button
6
Close Button
7
Gain
are only available if the Bass and Treble filters are inserted
), click to change the name of the selected
Change Name
after changes to a group have been made. The
to delete the group.
to close the dialog box. Any changes that have not been
XMP 240 C AT • Configuration Tools
dialog box.
<empty> next to the group
, , ,
Mute Bass Treble,
Select
, , , , or
Gain Mute Bass Treble
Select
Confirm
drop-down
Select Group
69