Extron electronics XMP 240 C AT User Manual page 51

Dynamic Filters Tab
Figure 70. Feedback Suppressor Dialog Box - Dynamic Filters Tab
Dynamic Filters Tab — Provides access to dynamic filter configuration options.
1
Dynamic Filters List — Displays a list of 15 dynamic feedback suppression filters.
2
As feedback is detected on the virtual return channel, dynamic filters are applied to
suppress feedback with the
Move to Fixed Button — Transfers the dynamic filter along with its current parameters
3
to the tab, allowing parameters to be edited. This frees up a filter slot in
Fixed Filters
the list.
Dynamic Filters
Clear Button — Clears the dynamic filter and contained parameters.
4
Clear All Button — Clears all dynamic filters and resets the feedback detection and
5
suppression process.
Lock Button — Locks current dynamic filters and prevents more dynamic filters from
6
being applied.
Bypass FBS Button — Bypasses the FBS processor. When the button is red, FBS is
7
bypassed.
Set Defaults Button — Resets parameters on all tabs to their default values and
8
positions.
OK Button — Confirms changes made to the contained parameters and closes the
9
dialog box.
Feedback Suppressor
Cancel Button — Reverts any changes made to the contained parameters back to
¢
their states when the current instance of the
opened and closes the dialog box.
1
2
3
4
5
6
7
8
9
¢
parameter defined in the
Q
Settings
Feedback Suppressor
XMP 240 C AT • DSP Configurator Software
Dynamic Filters Tab
Dynamic Filters List
Move to Fixed Button
Clear Button
Clear All Button
Lock Button
Bypass FBS
Set Defaults Button
OK Button
Cancel Button
tab.
dialog box was
45