Renaming A Receiver Or Transmitter - Extron electronics AXI 22 AT User Manual

Renaming a Receiver or Transmitter

In addition to renaming devices, individual Receiver and Transmitter channels can be
renamed in Dante Controller. To better organize the various Receivers and Transmitters, it
is recommended each Receiver and each Transmitter be named using a description of the
device they belong to, the location of the device, or the purpose of the channel.
TIP: It is essential that Dante Transmitter channels be named before audio
subscriptions are established. Existing subscriptions are removed when Transmitter
channels are renamed.
To view the Receiver or Transmitter channels in Dante Controller, click the
Receiver or Transmitter device name to expand it. The
device is expanded (see figure 28,
Figure 28.
Renaming a Receiver
The default names shown in the
connected Dante device (see figure 28,
through
Out 1
network.
).
1
Expanded Receivers and Transmitters
Dante Receivers
1
because the analog outputs receive signal from the Dante
Analog Out 4
sign becomes a
+
column are extracted from the
above). The AXI Receivers are labelled
AXI 22 AT and AXI 44 AT • Dante Controller
sign next to the
+
sign when the
-
Analog
25