Input Ducking Block - Extron electronics XMP 240 C AT User Manual

Input Ducking Block

The duck block contains a ducking processor as well as an adaptive gain processor.
• Ducker
present above a set threshold on the duck source (trigger).
Adaptive Gain
•
is present above a set threshold on the adaptive gain source channel (trigger).
Double-click the
processors can be selected.
Gain
Figure 55.
Select
Ducker
to insert an adaptive gain processor into the duck block. Depending on the processor
selected, the duck block displays
Figure 56.
If a ducking processor has been inserted and needs to be changed to an adaptive gain
processor, or vice versa, right-click the block and hover over
processor (see figure 57).
Figure 57.
(see the next page) — Decreases levels on specified channels when signal is
(see page 38) — Increases levels on specified channels when signal
block to open the drop-down menu where the
Duck
Duck Block and Drop-Down Menu
to insert a ducking processor into the duck block. Select
for a ducker or
DUCK
Ducking Block Icons
Changing Ducking Processor
Ducker
for adaptive gain.
AG
to insert a different
Insert
XMP 240 C AT • DSP Configurator Software
and
Adaptive
Adaptive Gain
36