Table of Contents
Advertisement
Remote
Communication and
Control
This section describes how to control the XMP 240 C AT with SIS programming and covers
the following topics:
•
•
•
•
•
•
Connection Options
The XMP 240 C AT Expansion Matrix Processor can be remotely connected via a host
computer or other device (such as a control system) attached to the rear panel RS-232 port
or LAN port, or the front panel USB Config port.
The XMP 240 C AT can be set up and controlled using SIS commands or DSP Configurator
software (see
configuration and control port connections. For information on DSP Configurator, see
Configurator Software
SIS commands can be executed using the Extron DataViewer application available from
www.extron.com. The host computer issuing the commands can be connected via the
following connections:
•
•
•
Connection Options
Host-to-Device Communications
SIS Overview
Command and Response Table for Basic SIS Commands
Command and Response Table for DSP SIS Commands
Object ID (OID) Number Tables
Installation
on page 4 for pin assignments and details on the
on page 10).
RS-232 Port
on the next page
LAN Port
on the next page
USB Config Port
on page 105
XMP 240 C AT • Remote Control and Configuration
DSP
103
Advertisement
Table of Contents
