Device Manager - Extron electronics XMP 240 C AT User Manual

3.
To delete a macro action:
1.
2.

Device Manager

Device Manager is used to configure and switch between multiple devices in Live or
Emulate mode within DSP Configurator (see
Devices can be placed and ordered in user-created folders for easily tracking systems with
devices across multiple rooms. When Device Manager contains multiple devices, all device
configurations are saved in a single DSP Configurator file.
Select
Figure 102.
1
2
3
4
5
Select . The action is inserted from the clipboard above the action that was right
Insert
clicked in step 1.
Right click the box furthest to the left in the action to be deleted.
Click .
Delete
Tools > Device Manager
Device Manager Dialog Box
Add Device Button — Click the
screen to select another device to be configured. As a device is chosen or connected, it
is added to the
Device Manager
Clone Device Button —Click the
When a device is cloned, information within the device configuration file is also cloned.
NOTE: If Live mode is enabled, a backup may need to be performed before the
device can be successfully cloned.
Remove Device Button — Click the
device from the device manager. Select a folder and click this button to delete the folder
and all devices it contains.
Expand and Collapse All Buttons — Click the
show the devices it contains. Click the
New Folder Button — Click the
Live and Emulate Panel
to open the
Device Manager
Add Device Button
1
Clone Device Button
2
Remove Device Button
3
Expand and Collapse All Buttons
4
New Folder Button
5
Device List Panel
6
button to open the DSP Configurator splash
dialog box.
button to clone the currently selected device.
button to remove the currently selected
icon to expand all folders and
to collapse all folders.
button to create a new folder to drag a device into.
XMP 240 C AT • Configuration Tools
on page 17).
dialog box.
76