Table of Contents
Advertisement
page 17).
2.
Select the macro to be run from the
Figure 100.
Run Macro Drop-Down
To edit remote destinations:
1.
Click
Edit Remote Destinations
2.
Select an existing device from the
3.
Edit the information for the device or click
4.
Click
to save changes made to the remote destination.
Apply
5.
Click
to close the
Close
NOTE: See
step 3
on page 79 for information regarding adding a destination.
Manipulating Macro Actions
After a macro action has been fully configured, it can be cut, copied, pasted, inserted, or
deleted. Right-click the left-most box in the action line item (see
and select an option from the drop-down menu.
Figure 101.
Macro Action Manipulation Drop-Down
To cut a macro action:
1.
Right click the box furthest to the left in the action list item to be cut.
2.
Select
. The action is removed from the list and placed in the clipboard.
Cut
To copy a macro action:
1.
Right click the box furthest to the left in the action list item to be copied.
2.
Select
. The action is copied to the clipboard.
Copy
To paste a macro action:
1.
Right click the box furthest to the left in the action list item where the action is to be
pasted.
2.
Select
. The action is copied to the list item. Any existing action data is
Paste
overwritten.
To insert a macro action:
1.
Cut or copy a macro action to be inserted.
2.
Right click the box furthest to left in the action list item directly below where the action in
the clipboard is to be inserted.
drop-down in the tool bar.
Run Macro
from the
Configure Macros
Unique Device Name
to remove the selected device.
Delete
Edit Remote Destinations
XMP 240 C AT • Configuration Tools
dialog box.
drop-down.
dialog box.
figure
99,
on page 78)
3
75
Advertisement
Table of Contents
