Input Gain Block - Extron electronics XMP 240 C AT User Manual

Input Gain Block

n
Double-click the (
DIG GAIN
Figure 36. Input Gain Block
The dialog box provides controls to configure the input gain stage of the input
Input Gain
processing path.
1
2
3
4
5
6
Figure 37. Input Gain Dialog Box
Input Name — This name changes to match the default or user defined input name.
1
Gain Fader — Provides up to 24 dB of gain or 18 dB of attenuation in 0.1 dB steps.
2
Click the fader once and press the <
fader up or down in 1 dB steps. Press the <
the fader up or down in 10 dB steps.
dBFS Meter — This meter displays the input signal level in dBFS ranging from
3
-60 dBFS to 0 dBFS. Once the signal reaches or passes -1 dBFS (default) or the clip
threshold defined in the
located at the top of the meter lights red.
dBFS Numeric Readout — This read-only text box displays the numerical value of the
4
input signal level in dBFS.
Input Gain Text Field — This text field allows the user to enter a gain or attenuation
5
value in 0.1 dB steps.
Polarity Toggle Button — Inverts the signal polarity of the selected input. When the
6
button displays the black
button displays the black
Mute Button — Mutes signal at the input stage, preventing it from going any further in
7
the signal processing chain.
Source Drop-Down Menu — Selects the input audio source for the channel. Source
8
options are any of the 48 AT Inputs or 16 EXP inputs.
OK Button — Confirms changes and closes the
9
) block to open the
Input Gain
Input Name
Gain Fader
dBFS Meter
dBFS Numeric Readout
Input Gain Text Field
Polarity Toggle Button
> or <
Up Arrow
Page Up
dialog box (Options
Options
+ symbol on a gray field ( ), the polarity is normal. When the
symbol on a yellow field ( ), the polarity is inverted.
-
Input Gain
XMP 240 C AT • DSP Configurator Software
Input Gain dialog box.
Mute Button
7
Source Drop-Down Menu
8
OK Button
9
Cancel Button
¢
Input Gain Help Button
£
> keys to adjust the
Down Arrow
> or < > keys to adjust
Page Down
on page 87), the clip box
dialog box.
24