Table of Contents
Advertisement
Results
User's manual
The pop-up window closes and the new value is displayed on the
control panel.
5. Presets a1 - a3 and t1 - t3 only: Press Torque to switch the torque limit
on or off.
6. All presets: Press Reverse to switch the reverse rotation on or off.
7. Presets 1 - 3 and t1 - t3 only: Press Instrument spray to toggle between
water & air, air, and no spray. The amount of water and air can also be
programmed.
8. Presets 1 - 3 and t1 - t3 only: Press Chip blow to switch the automatic
chip blow on or off. The amount of water and air can also be
programmed.
9. Presets 1 - 3 and t1 - t3 only: Press Instrument light to switch the
instrument light on or off.
10. Presets a1 - a3 only: Press Apical action to toggle between the apical
actions auto stop, auto forward, and no action.
NOTE
The button looks different depending on which apical action is currently
in use.
11. Presets a1 - a3 only: Press Sound to turn off/on the sound of the apex
locator.
This only turns off the sound of the apex locator. It has no effect on the
beep signals of the torque function. We recommend that you keep the
sound on at all times.
NOTE
Changing the instrument spray, chip blow and instrument light values follows
the normal programming pattern. For more information, see sections
"Instrument spray" on page 176, "Automatic chip blow" on page 178 and
"Instrument light" on page 178.
When you have modified the settings of a preset, but have not saved them,
an asterisk can be seen on the Preset button.
The procedure for saving the modified preset settings is explained in section
"Saving modified preset values" on page 186.
25 Programming
Planmeca Compact i
185
Advertisement
Table of Contents
