Table of Contents
Advertisement
User's manual
Make sure that the sterile water tube is inserted so that water is pumped
from the sterile water bag to the instrument. The arrow on the pump
indicates the direction of the water flow, away from the bag and toward
the instrument.
3. Close the lid of the pump.
4. Connect the sterile water tube to the sterile water bag by pushing the
nozzle firmly into the opening at the bottom of the sterile water bag.
5. Route the other end of the tube to the instrument hose.
6. Connect the water tube to the instrument by sliding the tube over the
externally mounted spray nozzle as shown in the figure below.
10 Instrument system
Planmeca Compact i
51
Advertisement
Table of Contents
