Planmeca Compact i Touch v2 User Manual page 213

User's manual
To enter the Maintenance mode, press the Maintenance button.
Maintenance window shows the different cleaning programs.
The
The time stamp under the cleaning program name is an easy way to check
when the cleaning program was last started. However, it does not tell
whether the cleaning program was successfully completed.
While performing the flushing/cleaning, follow the instructions displayed on
the control panel. When the cleaning program runs without problems, the
messages only show briefly, but all messages can be viewed in the
message history log.
To view the message history log, see section "Viewing help and error
message history" on page 277.
Some control panel buttons are common for all cleaning programs, see the
following table.
Common cleaning program functions
Button Function
Displays additional information about the cleaning program
when you press the button during the cleaning cycle.
27 Flushing and cleaning programs
Planmeca Compact i 203