Table of Contents
Advertisement
23 Operating instruments
134
Planmeca Compact i
The spray flow rate can be programmed. See section "Instrument spray" on
page 176.
The amounts of water and air for the currently used spray type are displayed
on the control panel.
When sterile water is used, you can select between sterile water spray and
spray off. Sterile water is indicated by a Sterile water symbol and the
indicator light blinks green on the Instrument spray button.
For instructions on how to enable/disable the sterile mode, see section
"Enabling/disabling sterile water mode" on page 177.
Press Instrument spray once to switch on the water & air spray. You will hear
two short signal tones. Additionally, a green indicator light shows that the
water & air spray is switched on.
Press Instrument spray a second time to switch the air spray on. You will
hear one short signal tone. Additionally, a yellow indicator light shows that
the air spray is switched on.
Press Instrument spray a third time to switch off the instrument cooling
spray. You will hear one long signal tone. Additionally, the indicator light
goes out.
Alternatively, you can select the spray setting with the foot control. The
indicator lights on the control panel are lit accordingly.
Standard pedal: Push the pedal down briefly to select the spray setting.
Wide pedal: Push the pedal briefly to the left to select the spray setting.
Push the pedal once to switch on the water & air spray. You will hear two
short signal tones.
Push the pedal again to switch on the air spray. You will hear one short
signal tone.
Push the pedal a third time to switch off the instrument spray. You will hear
one long signal tone.
User's manual
Advertisement
Table of Contents
