Planmeca Solanna And Planmeca Solanna Vision Operating Light - Planmeca Compact i Touch v2 User Manual

22 Operating dental unit

22.6 Planmeca Solanna and Planmeca Solanna Vision operating light

114 Planmeca Compact i
NOTE
Only one of these functions can be enabled at a time. To change the
enabled function, contact your Planmeca dealer.
Control panel: Press Door open / assistant call to activate the function. You
will hear a short signal tone when the function starts.
Press Door open / assistant call for longer than 0.5 seconds to continue the
function until the button is released.
Foot control: When all the instruments are in their holders you can push the
pedal to the left to activate the Door open / assistant call function. If the
pedal is pushed for longer than 0.5 seconds, the function continues for as
long as the pedal is pushed.
NOTE
Alternatively, the foot control can be configured so that the Door open /
assistant call function is activated when you push the left-side or right-side
knob up. Contact your Planmeca dealer.
The duration of the signal can be programmed, see section "Duration of door
open / assistant call" on page 193.
CAUTION
Do not allow the patient to grab the operating light or its arm when getting
seated or getting up from the patient chair.
NOTE
The light must be moved from the handles only. Do NOT move the light from
the arm or from the light body.
NOTE
The light beam may speed up the hardening of some filling materials. Move
the light so that the light beam is not directed towards the filling material or
turn on the operating light's composite mode.
NOTE
To be able to use the operating light hands-free with the gesture sensor, the
sensor must be enabled.
NOTE
The sensor detects your hand movement at an approximate distance of 3 -
18 cm (1.2 - 7.1 in.) from the infrared sensor.
The distance can be adjusted, see section "Gesture sensor" on page 192.
User's manual