Traditional View - Planmeca Compact i Touch v2 User Manual

25.3.2 Traditional view

Steps
User's manual
7. Optionally, edit the name of the automatic position A - D by pressing Edit
next to the name.
This opens a new window with an alphanumeric keyboard where you
can edit the name.
Use the arrows in the top row to move up and down, to the left and right
in the text.
The symbols below the arrows in the top row can be used as they are, or
as a shortcut to letters containing that symbol. For example, when you
press ^ for about one second, letters with the symbol ^ are displayed.
You will automatically return to the normal view when you enter one of
the letters. To return to the normal view without entering a letter, press
the symbol again.
To display special characters, press Alt. Press Alt again to return to the
normal view.
To save the new name, press OK. To exit the window without changing
the name, press Close.
8. Press OK to confirm that you want to save the current position as an
automatic position.
If you do not wish to save the position as an automatic position, press
Close.
1. Move the chair to the required position by using the chair movement
buttons on the control panel or by using the foot control.
For instructions, see section "Manual operation" on page 100.
2. If you want the operating light or its composite mode to be on (off) in this
position, turn it on (off).
3. Adjust the intensity of the operating light and/or its composite mode as
described in section "Intensity" on page 190.
4. Press Program.
5. Press the desired chair position where to store the chair's position
(rinsing position, A, B, C or D).
6. Press OK to confirm that you want to save the current position as an
automatic position.
If you do not wish to save the position as an automatic position, press
Close.
25 Programming
Planmeca Compact i 175