Table of Contents
Advertisement
10 Instrument system
38
Planmeca Compact i
The instrument arms can be removed by pulling them out from their holders,
for example for cleaning or for covering with protective sleeves. The arms
are replaced simply by pushing them firmly into their places.
1. Roller
2. Hose guide
3. Instrument arm
When placing the instrument hose back in the roller, bend the hook of the
hose guide carefully and pass the hose over the roller.
The balance of the instrument arms can be changed according to the weight
of the instrument and personal preferences. Their flexibility can be adjusted
as follows:
1. Pull out the roller.
2. Adjust the balance of the instrument arm by moving the roller to a
desired position. Note that by positioning the roller higher up, the arm is
lighter to bend.
3. Push the roller back in to lock its position
NOTE
When balancing/adjusting the instrument arms, bear in mind that the
instruments shall under no circumstances fall over the patient.
User's manual
Advertisement
Table of Contents
