Timer Settings; Bowl Rinse And Cup Fill; Adjusting Cup Fill And Bowl Rinse Flow Rates - Planmeca Compact i Touch v2 User Manual

25.5 Timer settings

About this task
Steps

25.6 Bowl rinse and cup fill

25.6.1 Adjusting cup fill and bowl rinse flow rates

User's manual
The pop-up window closes and the new values are displayed on the
control panel.
Up to six timer settings can be programmed into the timer memory.
1. Press Program.
2. Press Timer.
A pop-up window opens.
3. Press the timer that you want to adjust.
A new pop-up window opens.
4. Adjust the length of the timer.
The minimum value is 5 sec. and the maximum 20 min. The adjustment
step is 5 sec.
5. Press OK.
The pop-up window closes.
The flow rates of the bowl flush and cup fill can be adjusted with the two
black knobs located inside the dental unit.
25 Programming
Planmeca Compact i 187