Oversized High Capacity Feeder, 1 or 2 Trays (Trays 6 and 7)
3. To remove the postcard bracket, loosen the screw on the left side of the tray, then remove the
bracket.
4. To install the postcard bracket:
a. Place the bracket on the locating pins on the upper frame and in the grooves on the bottom
of the tray.
b. To lock the postcard bracket in place, tighten the thumbscrew.
5. Load the postcard stock SEF (short-edge feed) and against the right side of the tray.
282
Xerox
®
PrimeLink
User Guide
®
B9100/B9110/B9125/B9136 Copier/Printer