2. Hold the belt on the waste container, then remove the container with both hands.
3. Discard all paper waste and scraps.
Note:
Ensure that the waste container is emptied completely. If any paper waste or scraps
remain, the container becomes full before a control panel message appears, causing the
printer to malfunction.
4. Reinsert the empty waste container, then slowly push in the container until it stops.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer
SquareFold
®
Trimmer Module
User Guide
443