Oversized High Capacity Feeder (Ohcf) Troubleshooting - Xerox PrimeLink B9100 User Manual

Oversized High Capacity Feeder, 1 or 2 Trays (Trays 6 and 7)
Oversized High Capacity Feeder (OHCF)
Troubleshooting
S S k k e e w w A A d d j j u u s s t t m m e e n n t t L L e e v v e e r r s s
The skew adjustment levers are found in all paper trays. The levers are used to improve the paper
feed accuracy and to reduce paper skew problems.
1. Rear skew adjustment lever
2. Right-side skew adjustment lever
• Ensure that the levers remain in their default positions. The default position is 0.The position
of the levers changes only when there is a skew problem when running a specific print job or
specific media type.
• Changing the skew adjustment levers from their default position can cause more skew
problems when running certain media types, such as coated, label, and transparency.
To set the skew adjustment levers, perform the following procedure:
1. Pull out the tray slowly until it stops.
2. Slide the rear skew adjustment lever to the right.
3. Gently push in the tray until it stops.
4. From the Tray Properties window, enter the correct paper information, including size, type, weight,
and if necessary, paper curl and alignment.
5. To save the information and close the Tray Properties window, touch OK.
6. Run your print job.
• If the paper is fed accurately without skew and the printed output is successful, your task is
complete.
• If the paper is skewed and the printed output is unsuccessful, proceed to the next step.
7. Pull out the tray until it stops.
8. Return the rear skew adjustment lever to the left, default position.
9. Slide the right-side skew adjustment lever toward the front of the paper tray.
10. Gently push in the tray until it stops.
288 Xerox ® PrimeLink
User Guide
® B9100/B9110/B9125/B9136 Copier/Printer