Xerox PrimeLink B9100 User Manual page 419

One side of the staple is
raised
Entire staple is raised
Important:
• Depending on the type of paper being stapled, the staples can be bent. If the bent staples
are stuck inside the finisher, the bent staples can cause paper jams.
• If staple jams occur, open the cover of the staple cartridge, then remove the bent staples.
Do not open the cover of the staple cartridge unless you are removing jammed staples.
Staple is bent in the reverse
direction
Staple is raised and the center is pressed in
Xerox ® PrimeLink ® B9100/B9110/B9125/B9136 Copier/Printer
Production Ready Finishers
Flattened staple
User Guide
419