Square Fold And Trim Features - Xerox PrimeLink B9100 User Manual

SquareFold ® Trimmer Module

Square Fold and Trim Features

S S q q u u a a r r e e F F o o l l d d F F e e a a t t u u r r e e
The Square Fold feature is available only when the printer is connected to both a finisher with a
booklet maker and the SquareFold
You can access and select the Square Fold feature from your computer print driver, the printer user
interface, or from the print server.
S S q q u u a a r r e e F F o o l l d d A A d d j j u u s s t t m m e e n n t t S S e e t t t t i i n n g g s s
The Square Fold feature can be enabled or disabled, based on the user preference. When the feature
is enabled, select an option for the finished booklet job.
Note: Before you print large jobs, print one or more test prints.
Description
Number
1 When your finished booklet is five or fewer pages and printed on paper that is lighter than
100 g/m
the booklet is -2.
2 When you want the least amount of pressure applied to the spine of the booklet, select -1
/ Low / Low 1. The less pressure applied to the booklet, the more rounded the booklet
spine becomes.
3 Auto / Normal is the default setting and is used for most jobs.
4 When you want a greater amount of pressure applied to the spine of the booklet, but not
as much pressure as the +2 setting, select +1 / High / High 1.
5 When you want the maximum amount of pressure applied to the spine of the booklet,
select +2 / Higher / High 2. The more pressure that is applied, the more square the booklet
spine becomes. The greatest amount of pressure that can be applied to the booklet is +2.
Booklet Example
The following images show two different booklet types:
438 Xerox ® PrimeLink
User Guide
Trimmer Module.
®
2 , select -2 / Lower / Low 2. The least amount of pressure that can be applied to
® B9100/B9110/B9125/B9136 Copier/Printer