Paper And Media For Inserter Tray T1; Supported Paper For Inserter Tray T1 - Xerox PrimeLink B9100 User Manual

Paper and Media for Inserter Tray T1

Tip: Paper fed from the inserter device is not printed on, but the paper is placed into the
printed output at selected locations.
S S u u p p p p o o r r t t e e d d P P a a p p e e r r f f o o r r I I n n s s e e r r t t e e r r T T r r a a y y T T 1 1
Paper Size
A4 (210 x 297 mm) or Letter (8.5 x
11 in.)
A3 (297 x 432 mm) or Tabloid (11
x 17 in.)
B4 (250 x 353 mm) or Legal (8.5 x
14 in.)
L L o o a a d d i i n n g g P P a a p p e e r r i i n n I I n n s s e e r r t t e e r r T T r r a a y y T T 1 1
Tray T1, also known as the Post-Process Inserter or the Interposer, is used to load paper to be used as
separators and covers.
• Paper loaded into Tray T1 does not go through the print engine for printing. Use this tray for
preprinted stock and for insertion into the printed output.
• Tray T1 holds a maximum of 200 sheets when using 20-lb/75 gsm paper.
• You can load paper in the LEF or SEF direction.
• For supported paper information, refer to
Before using Tray T1, review the following guidelines:
• Remove any remaining paper from the tray.
• Load all the paper required for the job into the tray.
• To use the saddle stitch or bi-fold options, ensure that the paper loaded in the main feeding tray is
the same size as the paper loaded in tray T1.
• For supported paper information, refer to
Paper Weight
52–350 g/m 2 uncoated
72–350 g/m 2 coated
Supported Paper for Inserter Tray
Supported Paper for Inserter Tray
Xerox ® PrimeLink ® B9100/B9110/B9125/B9136 Copier/Printer
Inserter Module
Tray Capacity
250 sheets, based on Colotech+90
paper
T1.
T1.
User Guide
315