Xerox PrimeLink B9100 User Manual page 215

7. Move lever 3b on the right of the fuser unit as necessary, then remove the jammed paper.
If the jammed paper remains inside and it is difficult to remove, return the transfer module to the
original position, then pull out the duplex module. Try again to remove the jammed paper.
8. Lower the handle under the center of the transfer module, then remove the jammed paper.
9. Insert the transfer module completely, then rotate the green lever 2 to the left.
Note: If the lever cannot be turned, pull out the transfer module to the middle, then insert
it again.
10. Close the front cover completely. If the front cover is open even slightly, the machine does not
operate.
Xerox ® PrimeLink ® B9100/B9110/B9125/B9136 Copier/Printer
Troubleshooting
215
User Guide