7. Adjust the paper guides so that they touch the edges of the stack.
The paper Tray Properties window appears on the control panel.
Note:
Do not load materials above the MAX line on the guides.
8. Tighten the four screws on the front-edge guide.
9. On the Tray Properties window, verify that the correct paper information such as size, type and
weight, are selected and match the media that is loaded in the XLS Bypass tray.
10. To save the information and close the Tray Properties window, touch OK.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer
Tray 5 (Bypass)
255
User Guide